Possible wall configuration.

The module has now become smaller in length to fit into the kiln racks. Additionally, we changed the interior corner and widened the diameter so it was not as sharp.

All thicknesses are 1″ (except for the bottom of the planter and lips).

This is our current hanging method. It allows us to be able to flip modules for either the (a) planting or (b) lighting configuration because the lips are symmetrical/mirrored.

We re-designed the curve to work better for the look we wanted. We wanted it to seem continuous when the modules were connected. To achieve this we drew the curve as if it was 3 modules long then cut of the 2 on the ends.